Light 5 Axis Double Stage Double Arm Injection Robot - High Precision Automation Equipment from China Suppliers and Factory
This equipment adopts traverse-type 5-axis servo drive architecture, equipped with double-stage telescopic and double-arm cooperative working structure. The overall lightweight body design occupies little workshop space and enables convenient installation and commissioning.
Adopting full-process servo closed-loop control, the equipment runs smoothly without jitter. It can match horizontal injection molding machines, supports customized stroke and operation modes, and is compatible with multiple mold manufacturing processes including single mold, stack mold and three-plate mold. It adapts to diversified injection molding working conditions with great universality.
With independent full-servo control for 5 axes, its degrees of freedom are flexibly adjustable to realize multi-angle and multi-dimensional complex motions. The double-stage telescopic structure delivers sufficient telescopic stroke and accurate operation spacing. Two arms can work cooperatively or independently: the main arm picks finished products while the auxiliary arm takes sprues, finishing two procedures simultaneously to greatly shorten production cycles, suitable for complex material-picking and insert-embedding scenarios.
The equipment supports flexible programming and commissioning, enabling rapid product changeover for multi-variant and small-batch alternating production. Compared with multi-axis heavy-duty robots, it features lower procurement and operation-maintenance costs. Replacing manual work, it cuts labor expenses with low failure rate, offering far better long-term cost-performance than traditional automatic equipment and manual operation.
The body is made of high-strength lightweight materials for stable structure and lighter self-weight, effectively lowering operating load. The servo drive consumes energy on demand, greatly cutting energy loss versus conventional pneumatic and hydraulic robots. It features low running noise for energy conservation and environmental-friendliness. Meanwhile, the lightweight structure realizes faster start-stop response and remarkable improvement of working efficiency.
It can operate stably 7x24 hours non-stop with high repeat positioning accuracy, realizing stable picking without dropping or scratching products. It satisfies fast picking of standard plastic parts, as well as picking, stacking and sorting for precision small parts, large housings and special-shaped work-pieces. With comprehensive task-processing capacity, it fits most injection molding production scenarios.
Compatible injection molding machine tonnage: 50-650T; Y-axis stroke: 700-1300MM; Equipped with integrated drive-control system featuring strong anti-interference performance and precise repeat positioning. It supports long-distance communication and function expansion for stable operation and easy maintenance.
| Light 5 Axis Double Stage And Double Arm Injection Robot | |||||
| Model description | Unit | KWV-700PR | KWV-900PR | KWV-1100PR | KWV-1300PR |
| I.M.M.Range | (T) | 50-200 | 200-350 | 300-450 | 400-650 |
| L | mm | 1970 | 2150 | 2450 | 2750 |
| W | mm | 1570 | 1630 | 1810 | 1930 |
| H | mm | 1280 | 1400 | 1520 | 1640 |
| X | mm | 560 | 620 | 800 | 920 |
| Y | mm | 700 | 900 | 1100 | 1300 |
| Z | mm | 1160 | 1340 | 1640 | 1940 |
| Gripper angle | (°) | 90 | |||
| Max load | Kg | 4 | 6 | 8 | 10 |
| Minimum take out time | (S) | 1.2 | 1.6 | 1.8 | 2.2 |
| Drive system | V5-AC Servo Motor | ||||
| Working air pressure | Kgf/cm² | 5 | |||
| Air consumption | NL/cycle | 4 | 4 | 9 | 11 |
| Power | V | AC220V±10 50/60HZ Single Phase | |||
| Weight | Kg | 330 | 345 | 360 | 370 |
Widely applicable to various injection-molded products including home-appliance plastic accessories, automotive interior small parts, electronic precision plastic components, daily-use product housings, medical-device plastic parts and plastic packaging goods. It meets automatic production demands for precision small parts, standard parts and large housing parts, serving injection-molding production in civil, industrial, medical, automotive and other fields.
All core components adopt high-quality industrial-grade parts, including well-known-brand servo motors, integrated drive-control system, precision linear guide rails, high-strength double-stage telescopic arms, high-precision servo flip units, anti-slip vacuum suction cups and special fixtures. Durable and stable-precision components ensure long-term high-speed, accurate and stable equipment operation and reduce downtime risks caused by failures.
The equipment has been widely deployed in various injection molding factories with excellent on-site adaptability, simple installation & commissioning and fast connection to existing production lines. On-site, it runs stably with precise picking, effectively eliminating collision, contamination and safety hazards caused by manual picking. One unit can replace multiple workers and greatly boost production efficiency.
Customers generally report low failure rate, easy operation-maintenance and remarkable energy saving, which effectively improve production-line automation level and product yield rate.
KOWEY focuses on R&D and manufacturing of injection-molding automatic equipment. With years of in-depth industry experience, we possess mature R&D and production systems. This robot has gone through multiple iterations and optimizations with mature craftsmanship and stable performance, balancing quality and cost-performance.
Meanwhile, we provide one-stop services including one-on-one model-selection matching, free commissioning, lifelong technical guidance and rapid after-sales response. Customized solutions are available according to customers' production-line working conditions, helping enterprises realize rapid automation upgrading, reduce costs, improve efficiency and enhance core competitiveness.
The equipment covers a wide clamping force range from 50T to 650T horizontal injection molding machines, matching models across KWV-700PR, KWV-900PR, KWV-1100PR, and KWV-1300PR series.
The two arms work simultaneously or independently: the main arm retrieves finished products while the sub-arm takes runners/sprues. Combined with the double-stage telescopic mechanism, it achieves full stroke capacity with lower vertical space requirements and substantially shorter cycle times.
It employs an independent V5-AC Servo closed-loop drive system across all 5 axes. This guarantees jitter-free, smooth operations, fast start-stop response, and high repeat positioning accuracy during continuous 7x24 production.
Yes. It natively supports various mold manufacturing setups including single mold, stack mold, and three-plate mold operations, and provides flexible programming for rapid changeovers between small-batch and multi-variant runs.
It is broadly suitable for home-appliance accessories, automotive interior components, medical parts, precision electronics, packaging goods, and daily-use product housings, handling delicate small components as well as large structured parts.
KOWEY delivers end-to-end support including customized stroke matching, free on-site commissioning, lifelong technical guidance, and rapid after-sales assistance tailored to your specific workshop automation needs.
